-Eric
WS-12-250DC and high readings on Board 24v
-
eric@junct.com - Member
- Posts: 3
- Joined: Mon Jan 11, 2016 1:20 pm
- Location: Vinita, OK
- Has thanked: 0 time
- Been thanked: 0 time
WS-12-250DC and high readings on Board 24v
This was a newly deployed switch that currently has 1 AF5x active at 48v (not vh). This switch suddenly shutdown for a couple of hours on Friday and has since came back on it's own and stayed up. But I'm seeing some Red readings on the Board 24v and the Board 3v. I added a screenshot. Do I need to look at replacing this?
-Eric
-Eric
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-12-250DC and high readings on Board 24v
I would benh test it as explained here: viewtopic.php?f=6&t=2780#p19221
Bench testing might help you determine if there is anything else wrong or what caused it possibly.
Then RMA it
Bench testing might help you determine if there is anything else wrong or what caused it possibly.
Then RMA it
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
eric@junct.com - Member
- Posts: 3
- Joined: Mon Jan 11, 2016 1:20 pm
- Location: Vinita, OK
- Has thanked: 0 time
- Been thanked: 0 time
Re: WS-12-250DC and high readings on Board 24v
Thanks. I'll give it a try.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 23 guests