Hi guys , just a quick question. I am running the WS-12-DC with the following connections. AF5x HD , AF5x , Dynadish
All ports are working fine but i have a problem with ports 1 and 2 As soon as i connect any of devices it comes one but it's not carrying any data trough the port.
I switch to a different port and than it works fine. So is there anything i can do to try and recover or repair ports 1 and 2
WISP Switc WS-12-DC
- andreruiters
- Member
- Posts: 1
- Joined: Mon Mar 19, 2018 2:49 am
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WISP Switc WS-12-DC
Pull the unit and BENCH TEST it then report the results
viewtopic.php?f=6&t=2780#p19221
NOTE: This unit requires 48V to 53V input to power it.
viewtopic.php?f=6&t=2780#p19221
NOTE: This unit requires 48V to 53V input to power it.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
2 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 40 guests