Tower Design Help
Posted: Mon May 14, 2018 12:16 pm
Hello All,
We are building two new towers that will be solar powered. We have had temporary tower installations running off solar in the past; but this will be our first permanent installation. I was hopeing you guys with more experience could give some advice on equipment needed. We are in Baja California Sur so we get a ton of sunshine.
Tower 1 will have:
1x netonix switch, (ws-8-150-dc)
2x AF-5x-hd
1x Nanostation M5
Tower 2:
1x netonix switch, (ws-8-150-dc)
2x AF-5x-hd
2x Powerbeam M5 AC
We were looking at 2x solar panels, and 4x 110ah AGM batteries in each tower; but again, we dont have alot of experience in this arena.
So my question is; what would be your recommendation for batteries, charge controller, etc.
Appreciate any insights!
We are building two new towers that will be solar powered. We have had temporary tower installations running off solar in the past; but this will be our first permanent installation. I was hopeing you guys with more experience could give some advice on equipment needed. We are in Baja California Sur so we get a ton of sunshine.
Tower 1 will have:
1x netonix switch, (ws-8-150-dc)
2x AF-5x-hd
1x Nanostation M5
Tower 2:
1x netonix switch, (ws-8-150-dc)
2x AF-5x-hd
2x Powerbeam M5 AC
We were looking at 2x solar panels, and 4x 110ah AGM batteries in each tower; but again, we dont have alot of experience in this arena.
So my question is; what would be your recommendation for batteries, charge controller, etc.
Appreciate any insights!