I have a solar powered trailer with wireless and cameras, and 200AH at 24 volts of battery, with a MPPT solar controller. I have an idea for controlling a ventilation fan for the battery and equipment enclosure.
I have a small, low amperage brushless DC fan (5 watts at 24 VDC). I was planning on connecting it to an unused port on the switch, and set voltage control thresholds to where the fan would only run while charging, which should roughly coincide with cooling demand. This would also allow it to be the first load shed under low battery conditions.
Anyone see any problems with this idea?
Fan control via WS-8-150-DC
- Hardwired
- Member
- Posts: 1
- Joined: Wed Mar 08, 2017 10:36 am
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Fan control via WS-8-150-DC
Nope: Read this post for info on a power TAP
viewtopic.php?f=8&t=2729&p=18891&hilit=streakwave#p18891
viewtopic.php?f=8&t=2729&p=18891&hilit=streakwave#p18891
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
2 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 41 guests