I have a strange issue where when I move a certain port into a VLAN it will actually move a different port into the VLAN. I have upgraded to the latest firmware thinking that would fix it because the first thing in the changelog is a VLAN fix but it did not. Is this a known issue or am I missing something? Also I have verified that none of my ports are mislabeled.
Thanks,
Jake
VLAN Problems
- jakestevens19
- Member
- Posts: 7
- Joined: Thu Feb 22, 2018 4:14 pm
- Has thanked: 1 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: VLAN Problems
I am not following what your saying.
Maybe put up a couple screen grabs to demonstrate what your talking about.
Maybe put up a couple screen grabs to demonstrate what your talking about.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: VLAN Problems
jakestevens19 wrote:Basically I will add port 8 to a VLAN and the device on port 7 will lose connectivity to the network.
Please post up a screen grab of the VLAN TAB before you make the change and after the change.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- jakestevens19
- Member
- Posts: 7
- Joined: Thu Feb 22, 2018 4:14 pm
- Has thanked: 1 time
- Been thanked: 0 time
Re: VLAN Problems
So I made port 14 a trunk port and it made port 15 Tagged traffic on VLAN 200 and will not allow me to change it from that setting
- before changes
- after changes
Last edited by jakestevens19 on Tue Feb 27, 2018 2:08 pm, edited 1 time in total.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: VLAN Problems
Are you noticing that the column header for this model (26 ports) appears messed up.
You have the browser zoom above 110% - UN ZOOM
You have the browser zoom above 110% - UN ZOOM
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- jakestevens19
- Member
- Posts: 7
- Joined: Thu Feb 22, 2018 4:14 pm
- Has thanked: 1 time
- Been thanked: 0 time
Re: VLAN Problems
I figured it must be something like that. So 6 is 2, 7 is 3, 8 is 4, etc? Is there a way to fix this? I upgraded to the newest firmware hoping that would fix it.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: VLAN Problems
Actually it is not a BUG you have the ZOOM on your browser set above 110%
UN ZOOM to 110% or better yet 100%
Make sure your column headers are lined up with correct column.
When you zoom too large it messes up.
UN ZOOM to 110% or better yet 100%
Make sure your column headers are lined up with correct column.
When you zoom too large it messes up.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- jakestevens19
- Member
- Posts: 7
- Joined: Thu Feb 22, 2018 4:14 pm
- Has thanked: 1 time
- Been thanked: 0 time
Re: VLAN Problems
I see. I actually had to zoom out to 80% to get them to align properly.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: VLAN Problems
jakestevens19 wrote:I see. I actually had to zoom out to 80% to get them to align properly.
What browser are you using?
I use Chrome and it lines up to 110% zoom
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- jakestevens19
- Member
- Posts: 7
- Joined: Thu Feb 22, 2018 4:14 pm
- Has thanked: 1 time
- Been thanked: 0 time
Re: VLAN Problems
I'm using chrome but this laptop has a pretty large screen. I guess that solves that issue though if I just go to 80%.
Who is online
Users browsing this forum: No registered users and 59 guests