Hi All,
I've browsed the forums but can't seem to find anyone who has successfully powered a Trango Apex Plus or Lynx series radios. Trango's PoE injectors are complete garbage and I'd like to power them with the Netonix switch. Your feedback is greatly appreciated.
Thanks!
Keith
Can Netonix Power Trango Lynx?
- SYS7EM-Keith
- Member
- Posts: 8
- Joined: Fri Aug 19, 2016 5:33 pm
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Can Netonix Power Trango Lynx?
Did you look here FIRST? : viewtopic.php?f=6&t=1215
or do a search for it: search.php?keywords=%2BTrango+%2BApex&terms=all&author=&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=Search
or do a search for it: search.php?keywords=%2BTrango+%2BApex&terms=all&author=&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=Search
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- SYS7EM-Keith
- Member
- Posts: 8
- Joined: Fri Aug 19, 2016 5:33 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: Can Netonix Power Trango Lynx?
Like I said in my initial post, I searched the forums before posting. I looked at the two links you provided and I've seen those pages and none of them provide feedback on powering the model's described in my post.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Can Netonix Power Trango Lynx?
Well if ti would work it would require you to use 48VH
It "says" it has polarity protection I assume similar to MIMOSA radios.
You need to ask Trango support, our switch will provide 50V with a constant power draw of up to 75 watts with POE option 48VH with the following polarity pin out.
PINS 1,2,4,5 - POSITIVE
PINS 3,6,7,8 - NEGATIVE
It "says" it has polarity protection I assume similar to MIMOSA radios.
You need to ask Trango support, our switch will provide 50V with a constant power draw of up to 75 watts with POE option 48VH with the following polarity pin out.
PINS 1,2,4,5 - POSITIVE
PINS 3,6,7,8 - NEGATIVE
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- SYS7EM-Keith
- Member
- Posts: 8
- Joined: Fri Aug 19, 2016 5:33 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: Can Netonix Power Trango Lynx?
Trango's response:
"We require -48Vt on ALL eight pins, with the shield and drain wire acting as the + ground. This is why shielded cables and connectors are required, and we highly recommend soldering the drain wire to each shielded connector. I would suggest instead directly powering the radios. Forego POE altogether and run fiber to the radios for your network connections, and use the Trango rack mount -48Vt supply to run a two conductor power cable to the radios."
Looks like I will have to go that route :\
"We require -48Vt on ALL eight pins, with the shield and drain wire acting as the + ground. This is why shielded cables and connectors are required, and we highly recommend soldering the drain wire to each shielded connector. I would suggest instead directly powering the radios. Forego POE altogether and run fiber to the radios for your network connections, and use the Trango rack mount -48Vt supply to run a two conductor power cable to the radios."
Looks like I will have to go that route :\
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Can Netonix Power Trango Lynx?
SYS7EM-Keith wrote:Trango's response:
"We require -48Vt on ALL eight pins, with the shield and drain wire acting as the + ground. This is why shielded cables and connectors are required, and we highly recommend soldering the drain wire to each shielded connector. I would suggest instead directly powering the radios. Forego POE altogether and run fiber to the radios for your network connections, and use the Trango rack mount -48Vt supply to run a two conductor power cable to the radios."
Looks like I will have to go that route :\
Well there is hope for the future, we are considering making an adapter to work with radios like this next year.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- SYS7EM-Keith
- Member
- Posts: 8
- Joined: Fri Aug 19, 2016 5:33 pm
- Has thanked: 0 time
- Been thanked: 0 time
- ljg-vcn
- Member
- Posts: 1
- Joined: Thu Jun 23, 2016 2:21 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: Can Netonix Power Trango Lynx?
Was there ever a -48v adapter made as mentioned above?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Can Netonix Power Trango Lynx?
Nope, sorry
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
9 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 25 guests