Pair 3, 4 Short or Abnormal Termination

Post a reply
User avatar
lacibaci
Member
 
Posts: 21
Joined: Thu May 05, 2016 9:26 am
Has thanked: 8 times
Been thanked: 2 times

Pair 3, 4 Short or Abnormal Termination

Sat May 14, 2016 8:02 pm

Just connected 5 Hikvision cameras (100M interface) and cable test is failing on all of them. It either says Short or Abnormal Termination on Pairs 3 and 4. Other than that everything seems to be working fine...

WS-1--250-AC
1.3.9
Board rev. E
Top
User avatar
sirhc
Employee
Employee
 
Posts: 7415
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1608 times
Been thanked: 1325 times

Re: Pair 3, 4 Short or Abnormal Termination

Sat May 14, 2016 8:17 pm

That's normal behavior for a 10/100 device

Maybe do some searching and reading on this forum

Start with this thread: viewtopic.php?f=6&t=1178

cross-short is the bad ones to look for

But technically there is no Ethernet Standard that shorts pairs so of course it says fail
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Top
User avatar
lacibaci
Member
 
Posts: 21
Joined: Thu May 05, 2016 9:26 am
Has thanked: 8 times
Been thanked: 2 times

Re: Pair 3, 4 Short or Abnormal Termination

Sat May 14, 2016 10:50 pm

sirhc wrote:That's normal behavior for a 10/100 device

Maybe do some searching and reading on this forum

Start with this thread: http://forum.netonix.com/viewtopic.php?f=6&t=1178

cross-short is the bad ones to look for

But technically there is no Ethernet Standard that shorts pairs so of course it says fail


OK, thanks. Maybe the cable tester message should be updated.
Top
Post a reply
Return to General Discussion

Who is online

Users browsing this forum: No registered users and 34 guests