Netonix Forums

Posted: **Sun Oct 18, 2015 7:15 pm**

I have a tower install I need to do that is about 370 feet from the ground.

Any recommendations on a hybrid cable to run? (fiber + DC)?

Posted: **Sun Oct 18, 2015 7:18 pm**

Well if you use the WS-12-250-DC it will compensate for voltage drop from cable loss.

I would use AWG-12 or AWG-10

Posted: **Sun Oct 18, 2015 7:20 pm**

Right.... but any recommendations on some sort of hybrid all in one cable?

Posted: **Sun Oct 18, 2015 7:48 pm**

Our's when we have it but until then no really, I looked and found nothing

Posted: **Sun Oct 18, 2015 7:49 pm**

Fine... A WS-6-MINI on the tower it is then.

Posted: **Mon Oct 19, 2015 11:48 am**

If you have a really short tower...
http://www.ebay.com/itm/CommScope-HFT41 ... Sw7ZFVAd77

Not sure what it costs to have them make longer ones for you.

Posted: **Mon Oct 19, 2015 11:57 am**

http://www.te.com/usa-en/products/fiber ... =pgp-story

Let me know if you find somewhere to buy this cable at a reasonable price.

CP

Mounting Netonix on a tower