Page 1 of 1

3rd times a ch..... awww its a pain in the a**

Posted: Tue Oct 13, 2015 3:15 pm
by ulink
Acclimating myself to the Netonix gear with my 3rd trip up the tower to implement the WS-12-250
First two outings led to lack of success as my VLAN's configured were not right. Reading through forum and reviewing other configs, I am hoping tomorrow will be a success. But, figured it prudent to see if others can take a quick look and review my config plan.
netonix vlan setup.jpg
netonix vlan setup.jpg (87.59 KiB) Viewed 5052 times


In short, my BH comes in on port 1 and communicates with Mikrotik on SFP port 14. I have two other BH's on ports 11 and 12 then 4 sectors on 2,3,4 and 5.

Does it look legit?

Thanks for your time.

MT

Re: 3rd times a ch..... awww its a pain in the a**

Posted: Wed Oct 14, 2015 2:36 pm
by jjonsson
You're only able to receive/transmit tagged VLAN21 packets on port 1. So if the other end on port 1 is not sending data on vlan21 tagged, nothing comes into the switch...

You probably need to untag port 1.....

Re: 3rd times a ch..... awww its a pain in the a**

Posted: Wed Oct 14, 2015 3:06 pm
by ulink
Hi jjohnson
Thanks for responding. The other end is tagged 21 but I'll try it both ways on next climb.