The log information is giving me lots of "out of range" notifications. Here are a few of them. Is this a grounding issue? Or something else?
Sep 7 13:30:52 switch[731]: 24V is out of range (22.3V)
Sep 7 13:40:30 switch[731]: 24V is out of range (22.2V)
Sep 7 13:46:55 switch[731]: 3V is out of range (3.5V)
Sep 7 13:53:05 switch[731]: 24V is out of range (22.6V)
Sep 7 14:11:52 switch[731]: 24V is out of range (21.9V)
Sep 7 14:27:08 switch[731]: 3V is out of range (3.1V)
Sep 7 14:43:18 switch[731]: 24V is out of range (22.2V)
Sep 7 16:06:24 switch[731]: 24V is out of range (22.5V)
3V is out of range (3.1V)
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 3V is out of range (3.1V)
Upgrade firmware to v1.4.4 but if the problems is still there then you need to RMA it, follow the instructions here: viewtopic.php?f=6&t=1259
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: 3V is out of range (3.1V)
I upgraded to 1.4.4 but I'm still getting the error messages. Looks like I need to RMA it? I've got everything grounded and am using shielded and grounded cables. Not sure what would have caused this. The switch is basically brand new.
Sep 7 17:33:13 switch[1252]: 24V is out of range (21.9V)
Sep 7 18:11:39 switch[1252]: 24V is out of range (22.5V)
Sep 7 18:45:29 switch[1252]: 24V is out of range (22.6V)
Sep 7 23:19:56 switch[1252]: 3V is out of range (3.1V)
Sep 8 07:20:31 switch[1252]: 24V is out of range (22.5V)
Sep 8 09:10:48 switch[1252]: 24V is out of range (22.1V)
Sep 8 09:34:17 switch[1252]: 24V is out of range (22.5V)
Sep 8 09:34:50 switch[1252]: 24V is out of range (21.9V)
Sep 8 09:57:42 switch[1252]: 3V is out of range (3.5V)
Sep 7 17:33:13 switch[1252]: 24V is out of range (21.9V)
Sep 7 18:11:39 switch[1252]: 24V is out of range (22.5V)
Sep 7 18:45:29 switch[1252]: 24V is out of range (22.6V)
Sep 7 23:19:56 switch[1252]: 3V is out of range (3.1V)
Sep 8 07:20:31 switch[1252]: 24V is out of range (22.5V)
Sep 8 09:10:48 switch[1252]: 24V is out of range (22.1V)
Sep 8 09:34:17 switch[1252]: 24V is out of range (22.5V)
Sep 8 09:34:50 switch[1252]: 24V is out of range (21.9V)
Sep 8 09:57:42 switch[1252]: 3V is out of range (3.5V)
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 3V is out of range (3.1V)
What are you powering it with??????
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
lligetfa - Associate
- Posts: 1191
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 307 times
- Been thanked: 381 times
Re: 3V is out of range (3.1V)
It could also matter how whatever kit is being PoE powered is grounded. If there are ground potential differences due to poor bonding, there could be current from ground loops flowing through the switch.
Re: 3V is out of range (3.1V)
I am powering it with the AirFiber PoE 50-60W. I've got an identical switch powered the same way at another location and it hasn't even hiccuped in 6 months.
I've got two of the barrel connector power supplies en route to me right now. Maybe that will make a difference?
I've got two of the barrel connector power supplies en route to me right now. Maybe that will make a difference?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 3V is out of range (3.1V)
Are your Tower ground rods bonded to the Electrical service ground rods?
How far away from the tower is your electrical service ground rods?
How far away from the tower is your electrical service ground rods?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: 3V is out of range (3.1V)
It's on a house. I have it grounded directly to the outside breaker box.
I tried powering it and grounding it to the house next door with an extension cord. Same result. Voltage jumping all around. I powered down all the ports and only the switch was powered up. Same result.
I brought it home and plugged it in. Voltage jumping all around. I reset it back to factory default settings and same result.
Defective unit?
I tried powering it and grounding it to the house next door with an extension cord. Same result. Voltage jumping all around. I powered down all the ports and only the switch was powered up. Same result.
I brought it home and plugged it in. Voltage jumping all around. I reset it back to factory default settings and same result.
Defective unit?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 3V is out of range (3.1V)
No, we are investigating a software issue.
There is no danger of it messing up and we are looking at this issue in software.
Can you hold on a few days and let us see what we come up with?
There is no danger of it messing up and we are looking at this issue in software.
Can you hold on a few days and let us see what we come up with?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: 3V is out of range (3.1V)
Not a problem. I can wait.
I have another 6 port mini that has been chugging along great. It's running 1.3.8. If you can send me that firmware, I'll load it on my new 6 port mini and see if the problem goes away.
I have another 6 port mini that has been chugging along great. It's running 1.3.8. If you can send me that firmware, I'll load it on my new 6 port mini and see if the problem goes away.
Who is online
Users browsing this forum: No registered users and 56 guests