New tower we are doing in a small neighborhood. The local utility is going to bore underground to get power to our side of the road, but the Meter Pedestal is going to sit just off the road. Instead of running power 300ft up the hill ($$$$$$), the plan is to run ethernet cable in a conduit and lay it in the woods and use a WS-Mini at the bottom of the tower.
Will this work ok? 300ft run from our power source, to the WS-MINI at the base of the tower to power 3 24V ubnt radios?
WS-Mini proposed new tower - yay or nay?
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
WS-Mini proposed new tower - yay or nay?
- Attachments
-
- wsmini.jpg (412.34 KiB) Viewed 7174 times
-
- power.jpg (139.81 KiB) Viewed 7174 times
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
Re: WS-Mini proposed new tower - yay or nay?
55FT ROHN 45G
- Attachments
-
- 12190872_10206726527014235_7937664067392011754_n.jpg (104.37 KiB) Viewed 7172 times
-
- 12193596_10206726526694227_2178865461902159226_n.jpg (111.45 KiB) Viewed 7172 times
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-Mini proposed new tower - yay or nay?
Do not see why not?
Are you going to power the MINI with an airFIBER 24 POE brick?
https://www.streakwave.com/itemdesc.asp?ic=POE-50-60W
Are you going to power the MINI with an airFIBER 24 POE brick?
https://www.streakwave.com/itemdesc.asp?ic=POE-50-60W
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
Re: WS-Mini proposed new tower - yay or nay?
Yes an AF PoE brick, I have 2 other MINIs powered the same way.
-
lligetfa - Associate
- Posts: 1191
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 307 times
- Been thanked: 381 times
Re: WS-Mini proposed new tower - yay or nay?
I have a MINI on the end of a 300 foot run and am using all 5 PoE ports mostly for cams that with IR and heaters runs way more watts than 3 radios would. The 50V does drop a few volts over the distance but the UAP-Pro and two UVC-Pros have no problem with it and of course the MINI supplies the 24V conversion so no voltage drop there.TheHox wrote:Will this work ok? 300ft run from our power source, to the WS-MINI at the base of the tower to power 3 24V ubnt radios?
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 28 guests