hello
I have this problem with this switch, I have this message, I updated the firmware and it is still the same, I did the 20 second reset and it is still the same, any help please
Also perform the command that I saw in another post and it works like this
BusyBox v1.19.4 (2022-02-15 14:35:04 EST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
admin@Netonix_Switch:/www# arping -U $(ifconfig | grep -Eo 'inet (addr:)?([0-9]*\.){3}[0-9]*' | grep -Eo '([0-9]*\.){3}[0-9]*' | grep -v '127.0.0.1') -c 10
ARPING 192.168.1.20 from 192.168.1.20 eth0
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 629.470ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 0.814ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 0.836ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 108.941ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 408.468ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 0.832ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 408.794ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 1.660ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 1.628ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 3.854ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 3.618ms
Unicast reply from 192.168.1.20 [90:E2:BA:DA:01:A0] 3.713ms
Sent 10 probes (1 broadcast(s))
Received 12 response(s)
admin@Netonix_Switch:/www#
