Should the Af5x be set to 48v?
Is it normal to be jumping from 8w to 12w? can stick at 12.4w for 6/8 seconds, wondering if this is ok
Master side port 9 is powering the Af5X
The slave side is port 5 powering the Af5x and i am also getting a pause rate and bridge?
Also flowcontrol is off on every device, switches setup as default only enabled PoE nothing fancy
AF5X in the red W
- nightshadow36
- Member
- Posts: 30
- Joined: Tue Mar 17, 2015 9:02 pm
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: AF5X in the red W
So we have posts for questions like this: https://forum.netonix.com/viewtopic.php?f=6&t=1215#p9040
READ THE POST ABOVE BUT UNLESS YOU HAVE ONE OF THE ORIGINAL FEW AF5X I WOULD POWER IT WITH 48VH
There is an ADVANCED search by clicking on the magnifying glass in the search box.
READ THE POST ABOVE BUT UNLESS YOU HAVE ONE OF THE ORIGINAL FEW AF5X I WOULD POWER IT WITH 48VH
There is an ADVANCED search by clicking on the magnifying glass in the search box.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- nightshadow36
- Member
- Posts: 30
- Joined: Tue Mar 17, 2015 9:02 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: AF5X in the red W
Thanks i will check the model.
I check back maybe once a year trying to find my issue.
I dont think changing the voltage will fix the main issue but i will try if i have a later model AF5X
First day I bought the switch i had an issue.
viewtopic.php?f=17&t=1946&p=14359#p14359
I thought is was becuase of scanning with Aircontrol in the end it was not the case.
This is a later issue, and I completly forgot about the issues a few years ago.
viewtopic.php?f=17&t=5332&p=29028#p29028
I have changed ports, updated firmware, changed connections, changed cable, paid an electriction to check eltric socket grounding.
Older firmware no lockups new firmware lockups.
The first issue was becuase I had my Pc connected to the Switch so when turning the PC on off It would trigger all the ports to have a link change.
I forgot about this issue becuse since then i connected the Pc direct to my Mikrotik, but when cleaning out the rack i bumped one of the cables and it gave the same result.
Does this mean my switch has always been dodgy since I bought it, touching or disconnecting a cable seems to change many ports to change link state to up and down?
I know its been about 3 years becuase i never touch the cables I forgot about the problem, just would like to know why it happens
I am also seeing this often from the AF5X
I check back maybe once a year trying to find my issue.
I dont think changing the voltage will fix the main issue but i will try if i have a later model AF5X
First day I bought the switch i had an issue.
viewtopic.php?f=17&t=1946&p=14359#p14359
I thought is was becuase of scanning with Aircontrol in the end it was not the case.
This is a later issue, and I completly forgot about the issues a few years ago.
viewtopic.php?f=17&t=5332&p=29028#p29028
I have changed ports, updated firmware, changed connections, changed cable, paid an electriction to check eltric socket grounding.
Older firmware no lockups new firmware lockups.
The first issue was becuase I had my Pc connected to the Switch so when turning the PC on off It would trigger all the ports to have a link change.
I forgot about this issue becuse since then i connected the Pc direct to my Mikrotik, but when cleaning out the rack i bumped one of the cables and it gave the same result.
Does this mean my switch has always been dodgy since I bought it, touching or disconnecting a cable seems to change many ports to change link state to up and down?
I know its been about 3 years becuase i never touch the cables I forgot about the problem, just would like to know why it happens
I am also seeing this often from the AF5X
- Attachments
-
-
- new-1.jpg (52.27 KiB) Viewed 4576 times
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: AF5X in the red W
No, the link state change is due to RSTP, possibly the fact that vtss which is a service we have running is reloading which was for the most part corrected in v1.5.2.
If you like DISABLE STP/RSTP.
What is forcing all the ports to change is either a RSTP root issue or your using older than v1.5.2 or v1.5.3rcX as there was an issue in v1.5.1 which was removed from service.
If you like DISABLE STP/RSTP.
What is forcing all the ports to change is either a RSTP root issue or your using older than v1.5.2 or v1.5.3rcX as there was an issue in v1.5.1 which was removed from service.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
4 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 21 guests