Inconsistent Packet Loss

profician
Member
 
Posts: 9
Joined: Wed May 11, 2016 7:49 am
Has thanked: 4 times
Been thanked: 0 time

Inconsistent Packet Loss

Wed Oct 17, 2018 8:28 pm

We are having packet loss problems (along with high ping times) at a tower. I've been working the problem for awhile and cannot find a solution. Our monitoring system shows the problem starting at the Netonix WS-12-250-DC. But I see no problems on the switch. I've upgraded to firmware 1.5.0 (board rev F). Port isolation is on for all ports except the backhaul and on-site access router. STP is disabled. I also upgraded the backhaul (Ignitenet ML-60-35) firmware. The Netonix and backhaul are on the same network segment.
netonix_pings.png
Pings of the wisp switch

traffic.png
Traffic to the tower

backhaul_pings.png
Backhaul radio pings

Any suggestions on what to try next to figure this out?

User avatar
sirhc
Employee
Employee
 
Posts: 7415
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1608 times
Been thanked: 1325 times

Re: Inconsistent Packet Loss

Thu Oct 18, 2018 10:25 am

Look at each ports statistics looking for excessive pause frames or errors.
Try disabling Flow Control on all ports.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

profician
Member
 
Posts: 9
Joined: Wed May 11, 2016 7:49 am
Has thanked: 4 times
Been thanked: 0 time

Re: Inconsistent Packet Loss

Fri Oct 19, 2018 1:36 am

I should have thought about flow control...
These stats are what you were expecting?
Metrolink_port_stats.png
Netonix stats from backhaul port (Metrolink)

What is the Rx Filtered?
Thanks for your help!

User avatar
sirhc
Employee
Employee
 
Posts: 7415
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1608 times
Been thanked: 1325 times

Re: Inconsistent Packet Loss

Fri Oct 19, 2018 8:11 am

Yes your Tx Pause Frames are VERY HIGH, I would disable Flow Control but find out why you are having these Pause Frames, where is the bottleneck.

As far as Rx Filter: viewtopic.php?f=6&t=1586&p=11746&hilit=+rx+filter#p11746
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

profician
Member
 
Posts: 9
Joined: Wed May 11, 2016 7:49 am
Has thanked: 4 times
Been thanked: 0 time

Re: Inconsistent Packet Loss - RESOLVED

Tue Oct 23, 2018 9:18 am

Turning off flow control fixed the problem. Thanks for your help!

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 33 guests