Hi Guys,
We have been trying to figure out how to fully reboot the switch? I Mean, through the GUI and CLI, you can "reboot" the switching but not the POE completely. Is it possible to restart the switch and devices at the same time ?
Fully reboot switch
- info@rinkusoluciones.com
- Member
- Posts: 11
- Joined: Tue Jan 03, 2017 10:16 am
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Fully reboot switch
No, that is a design function.
This allows you to upgrade the firmware and allow the switch to reboot without dropping all your links.
If you want to bounce the POE ports you can click on the little gear on each port row and select bounce port which will power cycle the radio on that port.
Other than that you need to POWER CYCLE the switch to achieve what you want.
This allows you to upgrade the firmware and allow the switch to reboot without dropping all your links.
If you want to bounce the POE ports you can click on the little gear on each port row and select bounce port which will power cycle the radio on that port.
Other than that you need to POWER CYCLE the switch to achieve what you want.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
2 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 33 guests