Hello all,
Does anyone know how to do a fast or rapid ping from the GUI or shell of a Netonix switch?
Thanks in advance,
Keith
Rapid Ping
- SYS7EM-Keith
- Member
- Posts: 8
- Joined: Fri Aug 19, 2016 5:33 pm
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Rapid Ping
Well if your in the CLI you can drop to linux with the "CMD" command + [Enter].
Then it is a case of being a Linux method.
You type "Exit" + [Enter] to return to the CLI
Then it is a case of being a Linux method.
You type "Exit" + [Enter] to return to the CLI
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: Rapid Ping
Busybox, use by Netonix and most embedded linux based devices, don't support the -i option to set a lower interval. Busybox cut several option and build supported command in the shell to save space.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot] and 25 guests