je pose une question sur les SWITCH
on n'a 4 paramètres 24V 24VH OU 48V ET 48 VH
Mais si je comprends bien
V correspond à 802.3af ?
VH correspond à 802.3at ?
Je me trompe ???
802.3af/at
-
quadra - Experienced Member
- Posts: 143
- Joined: Sat Oct 31, 2015 8:25 am
- Location: France
- Has thanked: 3 times
- Been thanked: 2 times
802.3af/at
Bonjour à tous
je pose une question sur les SWITCH
on n'a 4 paramètres 24V 24VH OU 48V ET 48 VH
Mais si je comprends bien
V correspond à 802.3af ?
VH correspond à 802.3at ?
Je me trompe ???
je pose une question sur les SWITCH
on n'a 4 paramètres 24V 24VH OU 48V ET 48 VH
Mais si je comprends bien
V correspond à 802.3af ?
VH correspond à 802.3at ?
Je me trompe ???
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 802.3af/at
quadra wrote:Bonjour à tous
je pose une question sur les SWITCH
on n'a 4 paramètres 24V 24VH OU 48V ET 48 VH
Mais si je comprends bien
V correspond à 802.3af ?
VH correspond à 802.3at ?
Je me trompe ???
48VH is not for 802.3af, it is used to power airFIBER 24, airFIBER 5, WS-6-MINI, MIMOSA, and other special high current demanding radios
Use 48V for most 802.3af devices like phones
24V is for most airMAX radios
24VH is only for AF2X, AF3X, AF5X, do not use this on normal airMAX radios
Read these posts
viewtopic.php?f=6&t=1178
viewtopic.php?f=6&t=1147
Also read the PDF as it explains what each POE option puts on the PINs (voltage and polarity).
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
lligetfa - Associate
- Posts: 1191
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 307 times
- Been thanked: 381 times
Re: 802.3af/at
Please read the following wiki on PoE.
https://en.wikipedia.org/wiki/Power_over_Ethernet
Pay particular attention to section 8, https://en.wikipedia.org/wiki/Power_ove ... ity_limits and the table that shows what pins are used for Mode A and Mode B. As Chris said, they do not parallel the Netonix passive PoE 48V and 48VH.
Passive 48V energizes the same pins that Mode B does.
With great power comes great responsibility. Make sure you understand what pins the device uses for power and what the consequences are for which pins you energize.
All this said, you should not be posting such questions to the stories section. Please see the pink banner at the top.
https://en.wikipedia.org/wiki/Power_over_Ethernet
Pay particular attention to section 8, https://en.wikipedia.org/wiki/Power_ove ... ity_limits and the table that shows what pins are used for Mode A and Mode B. As Chris said, they do not parallel the Netonix passive PoE 48V and 48VH.
Passive 48V energizes the same pins that Mode B does.
With great power comes great responsibility. Make sure you understand what pins the device uses for power and what the consequences are for which pins you energize.
All this said, you should not be posting such questions to the stories section. Please see the pink banner at the top.
-
quadra - Experienced Member
- Posts: 143
- Joined: Sat Oct 31, 2015 8:25 am
- Location: France
- Has thanked: 3 times
- Been thanked: 2 times
Re: 802.3af/at
Bonjour
ok bien compris et merci,
mais cela serais intéressant de pouvoir passer en poe+ sur nos switch NETONIX....
ok bien compris et merci,
mais cela serais intéressant de pouvoir passer en poe+ sur nos switch NETONIX....
4 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 49 guests