Hi,
I was wondering if the WS-12-250B switch can power a Rocket M3 unit from 24V since the specs say 0,75A and the POE-adapter that ships with the AP says 1A.
Kind Regards
M
RM3 1A powerd by 24V?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: RM3 1A powerd by 24V?
Yes our switches will power ALL Ubiquiti gear.
Typical power draw of that radio is an average of 6 watts with a max of 15 watts during heavy transmit periods.
Typical power draw of that radio is an average of 6 watts with a max of 15 watts during heavy transmit periods.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
ehsab - Member
- Posts: 18
- Joined: Wed Dec 09, 2015 1:39 pm
- Location: Sweden
- Has thanked: 0 time
- Been thanked: 1 time
Re: RM3 1A powerd by 24V?
Thanks for the information, i thought that would be the case after reading some threads.
But i believe the ToughSwitch 8 Pro would also power that device, but i have some weird issues when doing so and wondered if that was a power issue.
I can connect to the webgui just fine, and configure the radio. But i can't find any other networks when sitesurveing.
So my guess was that since the ToughSwitchs limitation was 0.5A / port the unit could draw as much power as it needed to scan the frequancies.
But it might not be a power issue at all. Ever been in that situation before, where no SSID's are displayed while sitesurveing?
Kind Regards
M
But i believe the ToughSwitch 8 Pro would also power that device, but i have some weird issues when doing so and wondered if that was a power issue.
I can connect to the webgui just fine, and configure the radio. But i can't find any other networks when sitesurveing.
So my guess was that since the ToughSwitchs limitation was 0.5A / port the unit could draw as much power as it needed to scan the frequancies.
But it might not be a power issue at all. Ever been in that situation before, where no SSID's are displayed while sitesurveing?
Kind Regards
M
3 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 26 guests