Site grounding

This is my personal thread to share practices that have served my WISP well
User avatar
rebelwireless
Experienced Member
 
Posts: 607
Joined: Mon Sep 01, 2014 1:46 pm
Has thanked: 31 times
Been thanked: 136 times

Re: Site grounding

Sat Aug 22, 2015 2:19 pm

You still need to ground everything correctly, the fiber does absolutely nothing to protect your tower side gear. fiber does isolate your ground-level gear though, which is an obvious bonus.

User avatar
now
Member
 
Posts: 6
Joined: Fri Dec 04, 2015 2:50 pm
Location: Walcott, IA
Has thanked: 1 time
Been thanked: 1 time

Re: Site grounding

Tue Mar 08, 2016 10:49 pm

Do you use shielded #2 to go up the tower or bare? and how do you normally attach it to a tower?
If its #2 bare and lets say its going up a silo do you try to touch it to as much metal as possible? Like the cage and maybe railing?

User avatar
sirhc
Employee
Employee
 
Posts: 7441
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1616 times
Been thanked: 1332 times

Re: Site grounding

Tue Mar 08, 2016 11:14 pm

now wrote:Does you use shielded #2 to go up the tower or bare? and how do you normally attach it to a tower?
If its #2 bare and lets say its going up a silo do you try to touch it to as much metal as possible? Like the cage and maybe railing?


I run #2 Green which has an insulation.

I run #2 Tin when burring it.

http://www.sitepro1.com/store/cart.php? ... _list&c=17

Normally youe ground system is insulated from tower except when you attach it to antennas and antenna mounts. Your not trying to pick up charges from the tower your trying to provide a better path from your equipment than the Ethernet cable.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
wisp-wand
Member
 
Posts: 54
Joined: Mon Nov 23, 2015 4:59 pm
Location: UK
Has thanked: 2 times
Been thanked: 2 times

Re: Site grounding

Mon Apr 11, 2016 11:56 am

Hi Chris, I would be interested in your opinion on this scenario.
We are on a water tower. it is made of reinforced concrete. We have our PSU at the bottom, where we pick up the mains and convert to 24vdc. We then have 1 pair thick gauge cable that cabled internally takes the DC 20 meters to the roof where our switch, and AP's are.On the roof there is a lightening conductor which is an aluminium strip. this runs around the top of the concrete tower, and anything metal such as ours and another colocated TV relay pole brackets are grounded to that bracket. The earth lug where available (EG on AF5X) have a 6mm earth cable that goes to the metal bracket. The lightning conductor runs down the outside, the full length of the tower to ground where there is a dedicated earth rod setup.

It seems to work ok and has survived 2 x summers with thunder storms etc no trouble, only recently has something started to occur, along with your post about grounding that has lead to think there maybe an issue.

Regards

Wayne

User avatar
sirhc
Employee
Employee
 
Posts: 7441
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1616 times
Been thanked: 1332 times

Re: Site grounding

Mon Apr 11, 2016 12:30 pm

Wayne can you post a few pictures of the site and the existing grounding system?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
chiefbmr
Member
 
Posts: 2
Joined: Fri Aug 08, 2014 7:20 am
Has thanked: 0 time
Been thanked: 0 time

Re: Site grounding

Fri Jun 03, 2016 5:03 am

What about a tower with no electric service? Solar/battery setup with a POE switch at the bottom and Cat5 up the tower.

Other than not bonding to electrical system, does anything else change?

And are there any advantages/disadvantages for a setup like this?


And what about taking the opposite approach. I have always wondered if the batteries, solar panels, cat5, antennas and radios were completely insulated from any ground source, would this be a better option than the ground and more ground way you describe? I know lightning can hit planes, but does anything get fried?

User avatar
chiefbmr
Member
 
Posts: 2
Joined: Fri Aug 08, 2014 7:20 am
Has thanked: 0 time
Been thanked: 0 time

Re: Site grounding

Fri Jun 03, 2016 5:25 am

I don't see any mention of having a lightning rod above all the equipment. Would this be beneficial? If so, would you run copper to the rod?

User avatar
rebelwireless
Experienced Member
 
Posts: 607
Joined: Mon Sep 01, 2014 1:46 pm
Has thanked: 31 times
Been thanked: 136 times

Re: Site grounding

Fri Jun 03, 2016 9:34 am

If I'm getting this right, the only ground is this metal strap around the outside of water tower? How is your equipment mounted? Are you sure the strap is big enough to provide adequate ground? Is there a lightning rod? If so is it attached to this grounding strap and if not...then that grounding strap is likely going to take a hit. I wouldn't want my AF grounded to that...

On radios that have a dedicated ground, you should have a dedicated ground wire run down. Antennas grounded to the structure and the radio with to a separate dedicated ground wire. I'm assuming that 24v source from ground level is run up to a Netonix WS? So then the Netonix should be on that dedicated ground too.

Do you feed data up or is the top isolated (ie wireless backhaul)?

User avatar
gripper
Member
 
Posts: 27
Joined: Thu Aug 20, 2015 12:22 pm
Location: Central Vermont, USA
Has thanked: 1 time
Been thanked: 1 time

Re: Site grounding

Wed Jul 13, 2016 4:27 pm

So...I'd like to put a WS in a tower site where I have great grounding. Currently, almost all radios are going through Atelicon/Hyperlink lightning arrestors just off the base of the tower, which I've never been wild about--I think they've caused me more trouble than they've avoided. From there we have a 50' run underground through pretty packed conduit to an cabinet inside conditioned space. Most of the radios are grounded to the tower itself, all three legs of which are explosive welded to a buried ring, #2 stranded copper IIRC. Per your advice, Chris, I'm considering eliminating the lightning arrestors. I think I would run green stranded copper up one tower leg and connect directly to all the radio grounds first, but I can't even think about trying to recable the cat5/6 from the cabinet to the radios on the tower for a continuous run. So the question is how to splice or otherwise connect the CAT for a minimum of insertion loss. Or do you think this is worth it at all?

User avatar
sirhc
Employee
Employee
 
Posts: 7441
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1616 times
Been thanked: 1332 times

Re: Site grounding

Wed Jul 13, 2016 5:23 pm

gripper wrote:So...I'd like to put a WS in a tower site where I have great grounding. Currently, almost all radios are going through Atelicon/Hyperlink lightning arrestors just off the base of the tower, which I've never been wild about--I think they've caused me more trouble than they've avoided. From there we have a 50' run underground through pretty packed conduit to an cabinet inside conditioned space. Most of the radios are grounded to the tower itself, all three legs of which are explosive welded to a buried ring, #2 stranded copper IIRC. Per your advice, Chris, I'm considering eliminating the lightning arrestors. I think I would run green stranded copper up one tower leg and connect directly to all the radio grounds first, but I can't even think about trying to recable the cat5/6 from the cabinet to the radios on the tower for a continuous run. So the question is how to splice or otherwise connect the CAT for a minimum of insertion loss. Or do you think this is worth it at all?


So you're saying the tower is 50' away from your equipment?

This is BAD as the building where the equipment is probably has a DIFFERENT Earth Ground.

Grounding radios to towers is NOT a grounding system. Steel is a much higher resistance than copper so any stray current, static charge, or ESD charge will take the nice copper Ethernet cable instead.

Yes there should be a MAIN ground bus on insulators at the base of the tower that is connected to all the ground rods or halo system for the tower. As well the tower should be connected to the ground rods as well but but to your bus which is insulated. You always insulate your grounding system except where it bonds to the antennas as you do not want to drain the tower in the middle of charge but rather hope that charge follows the steel down as much as possible so as not to overwhelm your ground path. You only want to drain the steel at your antennas. You're hoping charge in the middle will go down the tower instead of up and then into your ground wire as the tower legs are also bonded to the ground rods..

There should be a BOND wire between the tower ground system from this main bus to the service ground rods and a ground bus in your cabinet but since this is 50' away it should almost be #1 gauge wire which is 1" thick.

There should be a #2 green running up the tower to an insulated ground bus near your antennas and a #6 from that bus to each antenna/radio.

You want to make sure you have ample Ethernet Service loops so your Ethernet path is at least 10% longer than the intended ground path.

You need understand that ground potential differences is just as dangerous to your equipment as ESD and Static discharges.


Follow the guidelines in these posts (Read these posts several times):
viewtopic.php?f=30&t=1816
viewtopic.php?f=30&t=188
viewtopic.php?f=30&t=1429
viewtopic.php?f=17&t=1786&start=30#p13447

The idea is that all equipment is within 5 ohms of each other as far as ground potential and no matter where there is stray voltage or CURRENT that the intended path is shorter and less resistive than the Ethernet cables.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

PreviousNext
Return to Sirhc's Corner

Who is online

Users browsing this forum: No registered users and 1 guest