Issues when port is negotiating oddly

[mhoppes]

Has anyone else seen this issue? Best as I can tell it may be caused by perhaps wind blowing something and causing the port to not fully hold negotiation.

Basically, the port will show "No Link" or start having issues passing data. You can reboot the radio and it doesn't really change anything. However, doing a power cycle on the port itself from the switch seems to cause the system to work again.

It's almost like something in the Netonix gets confused by errors on the port and can't recover without a full physical port restart.

[mike99]

Only saw similar stuff with ESD issue.

[mhoppes]

So grounding issues in the switch again.... perfect....