FC is unchecked by default, MC is checked by default. I can't for the life of me figure out what they are. MC is multicast maybe?
What do they stand for? (I feel really dumb right now).
FC/MC on "Ports" page?
-
sirhc - Employee
- Posts: 7490
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1643 times
- Been thanked: 1336 times
Re: FC/MC on "Ports" page?
QuadeHale wrote:FC is unchecked by default, MC is checked by default. I can't for the life of me figure out what they are. MC is multicast maybe?
What do they stand for? (I feel really dumb right now).
If you mouse over the FC and MC it will tell you Flow Control and Multi Cast
You should enable FC under MOST circumstances, need to have Eric change the default behavior here.
If you are feeding a switch with 1G port(s) then feeding 100M ports you NEED Floc Control or performance SUCKS!!!!!!
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sirhc - Employee
- Posts: 7490
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1643 times
- Been thanked: 1336 times
Re: FC/MC on "Ports" page?
If you do not enable FC you get crappy downloads and OK uploads when you are feeding the switch from a 1G then feeding airMAX at 100M
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: FC/MC on "Ports" page?
But wouldn't you have to be running more than 100Mb towards said port(s)?
-
sirhc - Employee
- Posts: 7490
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1643 times
- Been thanked: 1336 times
Re: FC/MC on "Ports" page?
adairw wrote:But wouldn't you have to be running more than 100Mb towards said port(s)?
No, you should enable it under most cases.
My airMAX 100 Mb radios preform better with FC enabled on the ports going to the radio and the 1G port from the router but always test which work best for your network.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 31 guests