Download latest Firmware

[sirhc]

FIXES
- Fixed DHCP setting default gateway and DNS
- Fixed VLAN configuration with CLI
- Fixed changing password with CLI


KNOWN ISSUES
- None

Released - 4/17/2015

[sirhc]

FIXES
- Fixed saving config in human readable format when configuring with CLI
- Fixed fan thresholds
- Fixed fan issue with 1.2.0rc10

ENHANCEMENTS
- Added tarpit functionality to SSH server
- Added ability to use port range when configuring VLANs
- Added showing IP address of management VLAN to "show vlan" CLI command

KNOWN ISSUES
- None

Released - 4/22/2015

[sirhc]

FIXES
- Fixed CLI configuration allowing Untagged port on multiple VLANs
- Fixed conflict between STP and loop protection

ENHANCEMENTS
- Added paging to "show config" CLI command

KNOWN ISSUES
- None

[sirhc]

Same as v1.2.0rc12

Released 5/1/2015

[sirhc]

FIXES
- Fxed problem with SMTP when not using authentication
- Disabled SNMPv1 for security reasons

ENHANCEMENTS
- Changed default MTU 1528

KNOWN ISSUES
- Ubiquiti Discovery Protocol is still a little flaky

Released 5/19/2015

[sirhc]

FIXES
- Fixed problem when disabling IP address on VLANs
- Fixed trunking VLAN ports with only the default VLAN configured

ENHANCEMENTS
- Changed default MTU 1528

KNOWN ISSUES
- Ubiquiti Discovery Protocol is still a little flaky

Released 7/12/2015

[sirhc]

FIXES
- Fixed FALSE Loop Detection with Loop Protection across VLANs

KNOWN ISSUES
- Ubiquiti Discovery Protocol is still a little flaky

Released 7/15/2015

[sirhc]

FIXES
- Fixed problem with SNMP reporting firmware version
- Fixed TFTP commands in CLI
- Fixed trunking VLAN ports with only the default VLAN configured
- Fixed problem when disabling IP address on VLANs
- Fixed reading 48VH current
- Fixed problem with loop protection between VLANs
- Improved getting time from NTP server
- Improved SFP modules compatibility and better recovery on faults
- Updated busybox for DHCP fixes

ENHANCEMENTS
- Added option to exclude syslog messages from NMS - Set on the Device/Configuration Tab
- Added support for 802.1ad aka QinQ aka Provider Bridging
- Added PoE Smart feature - POE Smart now only checks ports for cross shorts on cold boot and when applying POE to a port
- Added Port utilities menu (Cable Diagnostics, Port Bounce, Port Detail) on Ports tab
- Added button to re-run cable diagnostics
- Added option to require login on console port
- Added RADIUS login option
- Added "Last IP" to MAC table (ARP learning)
- Added "Allowed VLANs" to Trunk ports
- Added IGMP Snooping
- Added Iperf client and server
- Added support for WS-12-DC, WS-12-250-DC, WS-8-250-DC, AND OTHERS
- Added Power Priority for WS-12-250-DC
- Added 60 second timeout to SMTP configuration test
- Updated SNMP MIB with Netonix's Private Enterprise Number (46242)
- Updated SNMP MIB with DC model statistics
- Updated SNMP daemon with DC model statistics
- Improved performance of the GUI Log page
- Changed default MTU to 1528

KNOWN ISSUES
- Ubiquiti Discovery Protocol is still flaky
- Port Bounce is not powering down for 5 seconds - DO NOT RAPID FIRE PORT BOUNCE COULD DAMAGE EQUIPMENT
This issue also affects Ping Watchdog, Scheduled Port Bounce,
- POE SMart is broken, it applies power then tests for shorts....I KNOW RIGHT

Released 8/16/2015

[sirhc]

v1.3.1 Was pushed out to fix some issues that could cause people problems

FIXES
- Fixed PoE Smart - POE Smart was applying POE then checking for cross shorts - Nuff said
- Added warnings when disabling HTTPS or SSH in GUI - Too many people were locking themselves out of the UI
- Made firmware upgrade dialog more user friendly- Too many people were complaining about this
- Fixed port Scheduled Port Bounce process getting restarted when correct time is set
- Fixed Ping Watchdog - The duration was not lasting the specified period of time

Released 8/18/2015

[sirhc]

FIXES

- Changed input voltage safety check to only work on WS-12-DC model
----This routine could cause switches with AC or DC power supplies to turn off 48V POE if the input voltage sensors are damaged or fail.
----A few people have had issues which could be damaged sensors - We are investigating

ENHANCEMENTS
- Added ability to emails log to arbitrary email address
- Added version selection for SNMP

Released 8/21/2015