I'm sorry my english is not so good
There is an error in Netonix as in the picturethe output voltages are really low.
Switch is old but I wonder if there is something that can be done
WS-8-250-AC Output PoE Voltage
WS-8-250-AC Output PoE Voltage
Hi guys
I'm sorry my english is not so good
There is an error in Netonix as in the picturethe output voltages are really low.
Switch is old but I wonder if there is something that can be done
I'm sorry my english is not so good
There is an error in Netonix as in the picturethe output voltages are really low.
Switch is old but I wonder if there is something that can be done
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-8-250-AC Output PoE Voltage
I fixed your picture in your post, next time read the instructions in my post footer on how to upload pictures.
Your switch has taken damage, most likely from ground current.
You can bench test it as described here: viewtopic.php?f=6&t=2780#p19221
My guess is if you build the ADVANCED TEST rig you will find the port that took the damage.
You could RMA it and get it repaired but it is 3+ years old, I would replace it.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Your switch has taken damage, most likely from ground current.
You can bench test it as described here: viewtopic.php?f=6&t=2780#p19221
My guess is if you build the ADVANCED TEST rig you will find the port that took the damage.
You could RMA it and get it repaired but it is 3+ years old, I would replace it.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 12 guests